Password reminder

On Site Bolting Services

30 day money back garantee

for stock items

Free Shipping

(for items less than 150lbs.)

Free Shipping

Payment solution

Money Back guarantee 30 day

Most popular products

Certificate

SSL Certificate

Product Details



Horizontal Bender 4" - GELBER BIEGER

Horizontal Bender 4" - GELBER BIEGER

Brand:
GELBER-BIEGER
GELBER-BIEGER in Losheim developed a hydraulic horizontal bending press with only 180 pounds of weight, which will replace the angle bender. The "Mobi-bender" is easy to transport on the worksites because it is only 48" long and 10" wide and high. 
 
Despite its handy dimensions, the horizontal press suppresses ten tons. This corresponds to a bending capacity of 4" x 5/8" for mild steel. An easily adjustable stop allows bending accuracy in the 0.1 mm range. The hydraulic device is always mounted separately and connected with two quick release buckles with the press. 
 
What makes the "Mobi-bender" so special  is that it pushes with the punch into the die. This is not the rule on small machines. In order to bend a closed part, the MOBI-bender has ability to replace the punch with the die. 
 
If necessary mandrel can be angled. So a rectangle of 2" leg length can be bent.
  • Dimensions (inches)                             48" x 10" x 11"

    Weight(lbs)                                           180

    Motor Power (kW)                                1,5

    Bending force (t)                                   10

    Tool height (inches)                               4"

    Bending capacity (inches) flat iron:       4" x 5/8" ( with V125)

    round materials with turntable (mm)     5/8"

  • Article No.
    MOBI-BIEGER_100
    Weight
    180 Lbs/pc
  •   Schnellanschlüsse   Bedienung   Anschlag      Mobi-Bieger Standard      umgedreht biegen   enges Biegen Enges biegen   Drehteller   Aufweiten   Schneiden   Ausklinken   Amerikanicher Bogen   mit Untertisch   Kettenglied   Aufweiten   mit Untertisch   Kettenglied 25 x 25   mit Untertisch   25mm Vierkant   Ausklinken   Kupferbiegen   Kupferbiegen   Kupferbiegen   V 80 mit 50mm Bohrung      kupferbiegen   Stempeladapter      Distanzklotz   Ausklinken   Multi V   V 80mm   V 125   Stempel für Kupfer   Biegedorn   Schneiden   Aufweiten   Drehteller   Sonderwerkzeug für große Radien         Schellen Biegen   Einfach zu bedienen   Vollmaterial 170 Grad   Stempeladapter   Rohrbiegen durch drücken   Standardstempel   Unfallverhütung   Werkzeugpaket  
  • OPTIONAL FOLDING SET 1

    V = 3.2" 
    V = 4" 
    bending pin 
    distance block
     

    TURNTABLE FOR MOBI-BIEGER

    Consisting of: 
    Rack and pinion drive 
    Standard turntable D = 8.3" 
    Center case-hardened 1.2" 
    With eccentric lever 
    Bridge with counter roller 
    set screws
    Turntable for Mobi-Bieger
    zoom
     

    RINGS FOR TURNTABLE / MOBI-BIEGER

    Size 1-1/2" - 5"

    Rings for Turntable / Mobi-Bieger
    zoom
     

    FLARING TOOL KIT FOR EXPANDING TUBES

    tubes: 1-1/16" to 2-23/64" (27-60 mm) 

    Maximum wall thickness: 5/64" (2 mm) 
    The advantage of this system is based on the principle of spreading, it is a simple adjustment. 
    The length of the flare and the flare diameter is adjustable. 
    The set consists of: 
    1x pipe expander toolholder 
    1x flaring 
    1x mandrel 
    (for each pipe diameter or other wall thicknesses 
    will each need their own flaring, 
    the tool holder is only required once)
    Flaring tool kit for expanding tubes
    zoom
     

    TOOL FOR NOTCHING 48/60

    for tubes having the following dimensions: 
    1-57/64" (48 mm) and 2-23/64" (60 mm) 
    The wall thickness should not exceed 9/64" (3.6 mm). 
    Easy installation with the help of intermediate plates
    Tool for notching 48/60
    zoom
     

    TOOL FOR NOTCHING 27/33/42

    for tubes having the following dimensions: 
    1-1/16" (27 mm), 1-19/64" (33 mm) and 1-21/32" (42 mm) 
    The wall thickness should not exceed 9/64" (3.6 mm). 
    Easy installation with the help of intermediate plates
    Tool for notching 27/33/42
    zoom
     

    TOOL FOR CUTTING

    flat iron, square steel and round material with a max. height of 2-23/64" (60 mm) and a maximum thickness of 25/64" (10 mm). 
    This version is not suitable for stainless steel.
    Tool for cutting
    zoom